★★★★★
“Patrick was great! He was able to come on short notice and had our problems solved in a matter of minutes! Friendly, reasonably priced, and knows what he is doing. Highly recommend them!”
Outlets & Switches
Outlet, Switch, and GFCI Replacement
Outlet and switch replacement across Yadkinville and the surrounding counties, from a single dead outlet to a whole-house changeout with tamper-resistant and GFCI protection.
Outlets & Switches
Outlets and Switches, Brought Up to Current Code
Outlets and switches wear out, and codes have moved on from what most older homes have in the walls. When we replace devices we upgrade them to current code, which means tamper-resistant outlets throughout and GFCI protection where water is nearby.
We handle single replacements, room refreshes, and whole-house changeouts. It is unglamorous work that matters: worn devices are one of the most common sources of the warm outlets and flickering we get called about.
From Customers We Have Helped
★★★★★
“Great experience with this electrical contractor. Professional, knowledgeable, and reliable from start to finish. The work was done right the first time, and everything was left clean and safe.”
How Device Work Goes
01
Count and check
We confirm what you have, test what is behaving badly, and flag anything that points to a bigger issue.
02
Quote the scope
One device or the whole house, you get a clear price up front. Estimates are always free.
03
Replace to code
Tamper-resistant outlets, GFCI where required, solid terminations on every device.
04
Test everything
Every device gets tested before we leave, and we haul off the old hardware.
What Affects the Cost of Outlets & Switches
Every job gets a clear, fair quote before work starts, and estimates are always free. These are the things that move the number.
- How many devices are being replaced
- How much GFCI protection your rooms require under current code
- The condition of the boxes and wiring behind the devices
- Whether diagnosis is needed on dead or misbehaving outlets first
- Whether it rides along with a rewire or remodel, which lowers the per-device effort
Close to home: Device changeouts are steady work for us across Yadkin County's older homes, where two-prong outlets and tired switches are still common. It is often the first job we do for a new customer, and doing it cleanly is how we earn the bigger ones later.
Outlets & Switches, in Detail
GFCI Outlets
Kitchens, bathrooms, garages, exteriors, and anywhere else water is close by. GFCI protection is what cuts the power before a fault becomes a shock, and we install it where current code requires it. One GFCI device can protect several outlets downstream of it on the same circuit, which is often cheaper than putting a GFCI at every location. We map the circuit first so the protection lands where it actually covers the room.
Tamper-Resistant Outlets
The current standard, with an internal shutter that keeps objects other than plugs out. All the outlets we install are tamper-resistant style, which matters most in homes with kids. Weather resistant versions are required outdoors and use a different seal than the indoor style, so we match the device to where it actually lives.
Switches and Dimmers
Worn, crackling, or mismatched switches replaced, and dimmers added where they make the room. We make sure multi-way switching actually works the way the room is used. Three way and four way switching is where most miswiring shows up, usually as a light that only works when another switch sits in the right position. We trace the travelers and correct it so every switch controls the light from every location.
Whole-House Changeouts
Every outlet and switch in the house replaced in one pass. Popular during rewires, renovations, and after a home purchase. The house ends up consistent, safe, and current. Doing a whole house at once also gives us a look behind every device in the place, which is the cheapest inspection of your wiring you will ever get. If we find a scorched terminal or a backstabbed connection, we tell you then rather than after it becomes a problem.
Dead and Damaged Outlets
A dead outlet is sometimes the device and sometimes a symptom of something upstream. We diagnose it properly instead of just swapping hardware; if the problem runs deeper, our troubleshooting service picks it up. If a device keeps failing in the same spot, that usually points at the circuit rather than the hardware, and we will say so instead of selling you another round of replacements.
Where we do this work: based in Yadkinville and serving Yadkin, Surry, Wilkes, Alleghany, Davie, and Forsyth counties. See all the areas we cover →
Related Services
One call covers the whole electrical system. These jobs often pair with this one.
Troubleshooting and Repair
Tripping breakers, dead outlets, flickering lights, and the strange faults nobody else wants to chase down.
Learn more →
Home Rewiring
Complete re-wiring for older homes and full system upgrades during renovations, from a single circuit to a whole house.
Learn more →
Lighting Installation
Indoor and outdoor lighting installs, including recessed LED systems and under-cabinet options.
Learn more →Frequently Asked Questions
01 Why do my new outlets have shutters in them?
Those are tamper-resistant outlets, the current code standard. The internal shutters keep anything other than a proper plug from going in, which is a real safety improvement in homes with children.
02 Where does code require GFCI outlets?
Broadly, anywhere near water: kitchens, bathrooms, garages, laundry, exteriors, and crawl spaces. We bring the areas we touch up to what current code requires.
03 My outlet is warm to the touch. Is that serious?
Treat it seriously. Kill the circuit if you safely can and call us at (336) 341-8813. A warm device usually means a loose or failing connection behind it.
04 Can you replace every outlet and switch in the house?
Yes. Whole-house changeouts are common during renovations or after buying an older home, and they are priced by the scope of the job before we start.
05 A dead outlet came back to life on its own. Should I still call?
Yes. Outlets that come and go usually mean a loose connection somewhere upstream, and that is worth finding before it gets worse.
Get a Free Estimate on Outlets & Switches
Tell us what you are dealing with and Patrick will get back to you. For urgent work, call the shop directly.